Create an account
Sign in
Racing Primary Transmission Daytona Anima 65-19 Teeth ● For riders who need more top-end speed. Ideal for those who want to push each...
More details Add to basket
Out of stockRacing camshaft for Daytona and Zongshen fiddy 125cc engine with reinforced springs and spring seat washers. This high-performance...
In StockDigital Direct internal rotor ignition with lighting function for Derbi euro 2 and 3 (D50B0) engines with gearbox version without...
In Stock2-stroke oil level gauge for: MBK Booster Spirit (pre-2004 – phase 1) MBK Nitro (pre-2013 – phase 1) MBK Mach-G...
In StockUpgraded OEM-style reed valve by Polini for 50cc 2-stroke Minarelli vertical engines MBK Booster, Stunt, NG, Spirit, Rocket - Yamaha...
In StockOpus Big Valve for Peugeot FOX. Its 8-petal carbon fiber reed valve allows you to install a large-section carburetor. Supplied with...
In StockHigh-performance MVT DD02 ignition for Peugeot 103 SPX / RCX and SP/MVL fitted with an electronic ignition taper crankshaft. This...
In StockDaytona MV28 Vacuum Carburettor for 125cc to 190cc Engines Japanese TK carburettor with a slide that opens according to the vacuum in...
In StockHight capacity injector : 2.6 for Honda MSX - GROM - Monkey 125cc (JC61 - JC75) for big tuning engine. Kitaco I-Map required
In StockIpone 50cc can of DOT4 100% syntetic brake and clutch fluid.Dry boiling point: 260 °Especially recommended for ABSDOT3 compatible
In StockDesign brake pump cover / cap - black anodised aluminium for MBK Booster and Yamaha Bw's 50cc 2T - after 2004 (phase 2). Delivered with...
In StockM6 threaded body screw with clip set - 10pcs The screw is a M6 x 12mm hexagon socket with a large domed head and the clip is a speednut M6.
In StockPremier Kevlar front brake pads. They can be mounted on all Yamaha and Mbk scooter models at the front (Nitro / Aerox, Booster / Spirit /...
In StockComplete wiring harness - loom - mainwire - original type for MBK Nitro/ and Yamaha Aerox, 50cc before 2004 (therefore not catalysed) How...
In StockComplete contactor key / Ignition switch for Nitro/Aerox 2004 and before 2004.
In StockTiming advance key, + 10° for all scooter with minarelli engine. Best acceleration
In StockNews and Advice
Black synthetic leather seat – long and lowered – compatible with Honda Monkey 125cc JB02-03-05
In StockTartan-style synthetic leather seat / saddle – red and black – compatible with Honda Monkey 125cc JB02-03-05
In StockSet of 2 Aluminum Rims – Tubeless – 10-inch x 3.0 Wide for Monkey Z50J, Singa, Chimp, Skylmini and other replicas The inner section...
In StockExhaust pipe replica Black warrior – matte black for Dax and Skyteam – Lifan – TNT City – Zhenhua... High-mount exhaust, supplied with...
In Stock28mm intake manifold for Peugeot scooters Speedfight, Buxy, TKR, Eliseo, Squab, Speedak, Trekker – compatible with Keihin PWK, Polini or...
In StockAnti-vibration rubber placed between the rear fender and the taillight on Honda Camino 50 PA
In StockRotating intake manifold Derbi–AM6 for PWK carburetor 24 to 30 mm Carburetor fitting diameter = 34 mm The rubber connector is angled at...
In StockPolini Sport air filter foam for MBK Booster, Stunt Rocket, Yamaha BW's Slider, NG Spy, Next Generation Bump, and any 50cc scooter...
In StockKitaco "stock look" exhaust for Honda Monkey 125cc JB02 / JB03 - Full stainless steel exhaust system with long header pipe for...
In StockLicense plate holder bracket for mopeds. Thanks to this plastic bracket, which fits the shape of 16- or 17-inch Moped fenders, you...
In StockTakegawa Scrambler Exhaust for Honda Monkey 125 JB05 This up-style silencer gives the Honda Monkey 125cc a fresh new look....
In StockTakegawa Original Look Exhaust for Honda Monkey 125cc JB05. The collector is made of stainless steel and removes the catalyst....
In StockTakegawa Tank Pads for Honda Monkey 125 JB02 - JB03 - JB05 This product is a set of tank pads for the Monkey 125, designed to protect...
In StockBig Throttle Body Kit for Honda Monkey 125cc JB03 – JB05 This product is a large throttle body developed by SP Takegawa for use with...
In StockHIGH COMPRESSION PISTON KIT – TAKEGAWA For Honda 125cc engines (GROM JC92, Monkey JB03/JB05, Dax JB04/JB06, CT125 JA65) FEATURES: -...
In StockThe N-20 camshaft improves performance at mid and high RPM, but it requires an engine that breathes better (intake + exhaust + mapping)....
In Stockmore than 15,000 references
with our partner: Laposte
from 50 euros purchase in Belgium
CB via Adyen and Paypal
Motorkit 2 scrl 12 rue des français 4430 Ans Belgium Phone : +32.(0)4.226.51.84 Email : motorkit@motorkit.com VAT BE 0442.807.275
We are at the service of lovers of 2 wheels: scooters, mopeds, 50cc gearbox, and also the mini 4-stroke. We mainly market tuning parts and accessories alone or in kit for the most classic scooters like the Booster, Nitro / Aerox, Peugeot Speedfight and Ludix but also for more recent brands, CPI, Keeway, Beeline, TNT, etc. The Derbi Senda, GPR, Aprilia RS and Yamaha TZR-DTR and other mechanics are not forgotten. 4-stroke enthusiasts will also find happiness in the choice of engines and parts for Honda Dax, Skyteam 125, Monkey and related. We are always looking to offer the best value for money, which brings us to distribute major continental brands such as Malossi, Polini, Athena, Dellorto, TNT, Leovince, Bidalot, Conti but we also import from Japan prestigious labels like Kitaco, Takegawa , G Craft.